• Dynamic Leader who offers a background in Pipeline, Refinery, and Power Plant Piping System Fabrication / Installation; Inspections; Visual Weld Inspections; Welder Compliance Audits; Weld Mapping; Hydro-Testing; Coating Inspection; and NDE; and showcases ability to see the big picture within evolving and competitive pipeline, power plant, petro-chemical, and offshore fabrication industries.
• Top Performer who can make sound decisions to reflect positively on project operations in alignment with a company s vision, value, and goals, and exhibits knowledge in inspection criteria of AWS, NACE, API, and ASME codes, as well as reading and interpreting isometric, orthographic, and P&ID drawings; welding procedure qualifications; compliance audits; test packages; and key documentation.
• Excellent Communicator who builds and sustains synergistic relationships with executive-level management, project teams, operational staff, stakeholders, regulatory agencies, and clients.

  Capitalized on the opportunity to perform vendor surveillance for a ConocoPhillips supply chain.

  Monitored fabrication, welding, and testing of piping spools, pressure vessels, and structural skids at Exterran and Koch facilities with equipment inspected ranging from Blowcase, Hi / Lo, Flare Knockout Skids, Slug Catchers, and FGCU to Heat Exchangers, Heater Treaters, and Compressors.

• Reviewed packages such as MTRs, NDE Records, Film, Heat / Weld Map, Heat Treat, and Hydro-Test Charts.
• Performed pipe inspections to API 5L and coating inspection at a coating plant, including ensuring mainline and bore pipe surface were prepared and coated to spec (i.e. FBE / FBE + Powercrete / ARO) at plants.
• Monitored holiday testing and adhesion testing efforts, and repair of coatings at pipe storage yards.

  Successfully assured equipment was fabricated to COP spec, drawings, P&IDs, and POs, as well as ASME BPVC, B31.3, API-1104, AWS D1.1, NACE 1, NACE 2, NACE 3 and NACE MR0175.

  Strategically steered results-focused welding on 55 miles of 20 (i.e. mainline, tie-ins, and fabrication).

  Directed inspection processes of the application of FBE coatings on field joint and fabrication welds.

  Qualified welders and performed weld audits as required.

  Ensured contractor followed strict safety rules and guidelines.

  Utilized broad scope of industry knowledge toward participating in welding / fabrication work on Chesapeake well pads building pig launchers, piping systems, and pipeline per API 1104 and B31.3.

  Welded at Anadarko Mega Pad compressor station (sizes 2 -30 pipe, .188 wall to 1200 wall, B31.3 severe).

  Successfully worked on 2 miles of 4 pipeline in Los Angeles, XXXXXX to meet project goals.

  Spearheaded details-driven inspections of welding to ensure desired quality met and / or exceeded standards, codes, or specifications, and further witnessed systems hydro-testing per client procedures.

  Coordinated all NDE, and accurately compiled and maintained documentation (e.g. test packages, audits).

  Led inspections of coating using various electrodes full circle spring, handle paddle brush.

Yyyyyy x. yyyyyy ￨ Page Two ￨ (xxx-xxx-xxxx

  Drove project success by participating on a TexSTAR endeavor with 100 miles of 24 from Tilden to Beeville, XXXXXX, participated on an Energy Transfer Company project with 20 miles of 16 from Pecos to Monohans, XXXXXX, and led an Anadarko project with 65 miles of 24 , 12 and 8 from Cotulla to Catarina, XXXXXX.

  Completed all jobs consisting of 6010 5P+ root and 8010 hotpass, fill, and cap.

  Directed quality assurance initiatives for a project consisting of structural steel, pressure vessels, and carbon and stainless steel piping systems, including inspecting welds and fit-ups to meet quality and specs.

  Ensured seamless project and / or operational processes by coordinating NDE and witnessing hydro-testing.

  Successfully performed detailed welder compliance audits.

  Efficiently inspected comprehensive welding efforts to ensure quality standards were met and / or exceeded, and were in strict compliance with comprehensive standards, codes, and / or specifications.

  Witnessed hydro-testing of piping systems using client procedures to achieve client objectives.

  Inspected steel erection, bolt-up, and bolt torquing to spec; inspected bolt-up of piping systems and verified gaskets, studs, and bolts; and verified torquing of bolt-ups.

  Directed fabrication and installation initiatives of underground high pressure piping on meter station in accordance with blueprints and client specifications which was instrumental in achieving facility objectives.

  Used GTAW and SMAW processes to perform welding on piping per approved procedures.

  Contributed sharp analytical abilities toward inspecting pipe and fitting preparations, fit-ups, and welds on carbon, stainless steel, Inconel, and hastelloy steel, including coordinating NDE and post-weld heat treatment on piping systems, pressure vessels, and furnace, as well as compiling hydro-testing packages.

  Led targeted inspections of bolt-ups of wide-ranging piping systems.

  Successfully witnessed hydro-testing of piping systems using client procedures.

  Played a vital role in visually inspecting welds on offshore structures, including all jackets, decks, and piles.

  Inspected bridge girder fabrication, performed weld mapping, coordinated NDE, and compiled documents.

  Conducted welder compliance audits, welding procedure qualifications, and qualification tests.

Associate of Applied Science in Welding Technology San Jacinto College

CPWI ￨ AWS CWI ￨ OSHA 30-Hour Program

Coating Inspector Program (CIP) Level I / II (NACE)

API-SIFE ￨ API-653 ￨ API-510 Pressure Vessel Inspection Course (Code West)

Liquid Penetrant Inspection Course Level I / II NDT Training & Testing Center

Magnetic Particle Inspection Course Level I / II NDT Training & Testing Center

Industrial Radiographic Film Interpretation Level II NDT Training & Testing Center

Date

Hiring Agent Name

Company Name

Address

City/State/Zip Code

Dear__________________:

I am seeking a challenging [ Insert Job Title ] role, and am submitting my resume for your review.

I am excited to build a rewarding career with your company, and can offer cross-functional experience in Pipeline, Refinery, and Power Plant Piping System Fabrication / Installation; Inspections; Visual Weld Inspections; Welder Compliance Audits; Weld Mapping; Hydro-Testing; Coating Inspection; and NDE. I am also well-versed in AWS, NACE, API, and ASME codes, as well as reading and interpreting isometric, orthographic, and P&ID drawings; welding procedure qualifications; compliance audits; test packages; and key documentation. To complement my background, please note that I attained an Associate of Applied Science in Welding Technology from San Jacinto College. I also hold CPWI credentials and completed a rigorous Coating Inspector Program (CIP), among others. Please consult my resume for a detailed list of additional professional training / development.

Recently, in a Quality Assurance / Quality Control role with Element Integrity Group, I performed vendor surveillance for a ConocoPhillips supply chain, including monitoring fabrication, welding, and testing of piping spools, pressure vessels, and structural skids at Exterran and Koch facilities with equipment inspected ranging from Blowcase, Hi / Lo, Flare Knockout Skids, Slug Catchers, and FGCU to Heat Exchangers, Heater Treaters, and Compressors. I reviewed packages such as MTRs, NDE Records, Film, Heat / Weld Map, Heat Treat, and Hydro-Test Charts, and performed pipe inspections to API 5L and coating inspection at a coating plant, including ensuring mainline and bore pipe surface were prepared and coated to spec (i.e. FBE / FBE + Powercrete / ARO) at plants.

A sampling of my achievements with Element Integrity Group included:

  Successfully assuring equipment was fabricated to COP spec, drawings, P&IDs, and POs, as well as aligning with ASME BPVC, B31.3, API-1104, AWS D1.1, NACE 1, NACE 2, NACE 3 and NACE MR0175.

  Monitoring holiday testing and adhesion testing efforts, and repair of coatings at pipe storage yards.

[ Suggestion! Address Here Any Skills / Qualifications / Achievements Relevant to the Job Posting ]. As this is just an example of my abilities, please kindly refer to my enclosed resume for additional experience.

I look forward to hearing from you, and thank you in advance for your careful consideration.

Sincerely,

Yyyyyy x. yyyyyy