Award-winning, Bilingual (English and Spanish) boiler expert with 38 years of valuable, hands-on experience.

  Expert knowledge of modern and industrial power plants for steam generating equipment.

  Nominated by a high level project manager in 2017 for the highest-level award at GE Power for outstanding performance, service and dedication; also earned quality service awards in 1983, 1984, 1997, 1998 and 2000.

  Frequently asked by customers to commission, troubleshoot, build or repair or tune their boilers.

  Senior Level Field Service Engineer, with experience training personnel on boiler operations at sites in the U.S., Europe, Asia, Central America, South America and the Caribbean.

  Strong project management and leadership skills and experience with OEM and non-OEM equipment.

  Willing to travel, including abroad.

Coal-Fired Combined Cycle-Fired Circulating Fluid Bed Boilers

Oil-Fired Sugar Mills/Bagasse-Fired Start-Up Tuning

Gas Power-Fired Open Paper Mills Parts Replacement

General Electric (GE) Power 1979-Present

Dedicated Service Engineer, GE Power (2015-Present)

Dedicated Service Engineer, Alstom (2000-2015)

Dedicated Service Engineer, Asea Brown Boveri (ABB) (1990-2000)

Dedicated Service Engineer, Combustion Engineering (1979-1990)

Sugar Mill (Bagasse-fired Boilers) La Romana, Dominican Republic (July 2016-Present)

  Install, commission, tune and test No. 6 fuel oil firing equipment.

  Lead construction supervisors and assist with installation and final quality control checks and commissioning.

  Improved windbox and reduced visible emissions and NOx on the two, 250,000 pound/hour boilers.

  Originally worked at site 2010-2011, commissioning the first HMZ, horizontal mixing zone (two, bagasse-fired industrial type, VU40 boilers); achieved 60% reduction in 2010, resulting in orders for HMZ systems.

Combined Cycle Power Plant & HRSG Maintenance, EcoElectrica Penuelas, Puerto Rico (1999-2017)

  Completed outage planning, inspections, and installation assistance of major pressure part replacement of the superheater and reheater at this 500Mw plant.

  Conducted annual condition assessment and maintenance programs, increasing spare parts.

Jorf Lasfar Electric Corp. El Jadida, Morocco (2004-2016)

  Resolved boiler operational issues with a 4 x 350 Mw pulverized coal-fired power plant.

Central Peidra Buena, Pampa Energia Bahia Blanca, Argentina (Nov. 2015-May 2016)

  Served as Lead Engineer, leading all training and managing the Operations and Commission Team.

  Completed installation, combustion tuning and guarantee testing on a 330Mw, Babcock Germany, supercritical boiler while firing No. 6 fuel oil and natural gas using GE Power, RSFC, low NOx firing system.

  Tuned HEA and natural gas ignitors, and UV/IR flame detectors completed on a 24 burner system.

  Enhanced superheater and reheater outlet tube metal temperature profile within ASME boiler code.

EME, Melnik Power Plant Hodonin, Czech Republic (Apr. 2015-Nov. 2015)

  Completed installation, testing and tuning of tangentially-fired, brown coal boilers with installation of four burner corners on six, 60 Mw, coal fired boilers (SNCR System).

  Achieved NOx and emissions results per EU standards for brown coal/lignite fired boilers.

  Turned around the project as Chief Consultant, helping the Commissioning Team and regaining the confidence of the customer.

Formosa Petrochemical Corp. Mai Liao County, Taiwan (July 2013-Sept. 2013)

  Achieved emission results after completing installation, tuning and testing of refinery waste gas firing system equipment installed on 2x100Mw, circulating fluidized bed boilers.

Mai-Liao Power Corp. Taiwan (2004-2013)

  Led bi-annual inspection and low NOx burner tuning on two, 600Mw pulverized coal/No. 6 oil fired units.

Alunorte Barcarena, Brazil (2011-2012)

  Performed boiler inspections and operational audits on two fluidized bed, coal-fired boilers and one Foster Wheeler oil-fired boiler at the world s largest alumina processing plant.

  Identified low boiler availability due to pressure part failures.

AES Gener, Northern and Southern Chile (2010-2012)

  Provided engineering and boiler inspection support to various pulverized coal-fired power plants.

Israel Electric Corp., Orat Rabin (Hadera) and Rutenberg (Ashkelon) Power Stations (2007-2012)

  Managed assessment and operational boiler tuning for four x 580 Mw, pulverized coal-fired boilers.

  Exceeded customer expectations, earning further assignments at the Reading, Eshkol and Haifa gas/oil fired power stations with inspections and firing systems tuning on B&W, El Paso-type boilers.

CELEC Termoesmeraldas Esmeraldas, Ecuador (2010-2011)

  Saved country from energy loss after restoring firing system and replacing pressure parts (1 x 130Mw plant).

Pequiven Maracaibo, Venezuela (1994-2010)

  Managed periodic boiler inspections on gas/oil fired industrial boilers in the utility section.

Oil Refineries Limited Haifa, Israel (2009)

  Led condition assessment and operational audit analysis of two, MU-type No. 6 oil/refinery gas-fired boilers.

ESB Dublin, Ireland (2003-2007 and 1997-1998)

  Commissioned first demonstration of NOX technology in Europe (1997-1998); led training (2003-2007).

  Performed periodic low NOx burner inspection and operational tuning on a 125 Mw, No. 6 oil/natural gas unit.

Damador Valley Corp. Calcutta, India (2007)

  Conducted operational audits and boiler efficiency testing on a 3 x 130 Mw pulverized coal-fired power plant.

Associate of Science (AS), Power Technology, Williamson College of The Trades Media, PA; earned 1979

Dear Hiring Manager:

With this letter, I wish to express my sincere interest in becoming your next (INSERT JOB TITLE HERE).

As my accompanying resume indicates, I am an award-winning, Bilingual (English and Spanish) boiler expert with 38 years of valuable, hands-on experience. My expert knowledge includes modern and industrial power plants for steam generating equipment. I have expertise with coal, oil, gas and combined cycle power plants, as well as sugar mills/bagasse-fired, circulating fluid bed boilers and open paper mills. Among my additional unique qualifications:

  Nominated by a high level project manager in 2017 for the highest-level award at GE Power for outstanding performance, service and dedication; also earned quality service awards in 1983, 1984, 1997, 1998 and 2000.

  Frequently asked by customers to commission, troubleshoot, build or repair or tune their boilers.

  Senior Level Field Service Engineer, with experience training personnel on boiler operations at sites in the U.S., Europe, Asia, Central America, South America and the Caribbean.

  Strong project management and leadership skills and experience with OEM and non-OEM equipment.

Some of the major projects I have worked on include:

  Turned around a project in the Czech Republic, helping the Commissioning Team and regaining the confidence of the customer.

  Resolved boiler operational issues with pulverized coal-fired power plant in Morocco and Taiwan.

  Exceeded customer expectations in Israel, earning further assignments at other plants.

  Saved Ecuador from energy loss after restoring firing system and replacing pressure parts (1 x 130Mw plant).

  Commissioned first demonstration of NOX technology in Europe (1997-1998) at a plant in Ireland.

Currently, I am leading the install, commission, tune and test of No. 6 fuel oil firing equipment at a sugar mill in the Dominican Republic. I lead construction supervisors and assist with installation and final quality control checks and commissioning. I m helped improved windbox and reduced visible emissions and NOx on the two, 250,000 pound/hour boilers.

As your leader, you will find me to be a team player committed to exceeding your performance expectations. I have no doubt that I would be a valuable asset, and look forward to interviewing with you in the near future.

Sincerely,

Yyyyyy x. yyyyyy

787-365-7531

abc@xyz.com

Dear (Person You Interviewed With):

I am writing to personally thank you for providing me the opportunity to interview with you and discuss the exciting position of (INSERT JOB TITLE HERE). Having gained a deeper insight into the job requirements and your objectives, I am confident I can exceed your performance expectations.

As discussed, I am an award-winning, Bilingual (English and Spanish) boiler expert with 38 years of valuable, hands-on experience. My expert knowledge includes modern and industrial power plants for steam generating equipment. I have expertise with coal, oil, gas and combined cycle power plants, as well as sugar mills/bagasse-fired, circulating fluid bed boilers and open paper mills.

Should you have any additional questions, please feel free to contact me at your earliest convenience. Again, thank you for the interview. I look forward to your response.

Sincerely,

Yyyyyy x. yyyyyy

787-365-7531

abc@xyz.com